Author Archives: BDS Plumbing Solutions Inc

How do you stop a gas pipe from leaking?

gas pipe with a label

The origins of natural gas

Have you ever wondered where natural gas comes from to cook our food and heat our homes? Before we talk about gas line leaks, let’s review the origin of natural gas. What started as microscopic plants and animals is the starting substance for most of the natural gas used today. Millions of years ago, these living organisms absorbed energy from the UV rays, and their bodies stored that has carbon molecules. 

Layers of sediment covered their bodies as they died and sank into the seas. This action resulted in creating organic feedstock that when they pressurized from compaction with the earth’s heat, natural gas was formed. Natural gas is a preferred choice for many when it comes to cooking and heating their homes. It is a clean-burning source of energy, and it can also be a dangerous product when there is a gas line leak. It is because of the dangers that a gas line leak can create that correct gas line installation is essential. 

How can you tell if your gas line is leaking?

Gas lines are found above ground and underground, and over time, they can become corroded and deteriorate. Experts recommend having any natural gas lines inspected annually as a part of homeowner maintenance and offer the following signs that there is a gas line leak. 

  • Dead Indoor or Outdoor Plants and Vegetation: If you notice patches of dead plants or vegetation around your home’s exterior or plants are dying inside the home for no apparent reason, there may be a gas line leak. 
  • Hissing Noises: If there is a hissing noise around any gas lines, there is probably a gas line leak, and when the sounds are audible, it is a substantial leak. 
  • Rotten Egg or Sulphur Odor: Natural gas and propane are both colorless and odorless in the natural form. To give them the distinctive odor we smell, gas companies add mercaptan for safety purposes. If you notice a rotten egg or Sulphur order, there is a gas appliance or gas line leak.
  • Bubbling: To confirm a gas line leak, you can mix dish soap with water then wipe across where you suspect a gas line leak. If there are bubbles, this confirms a gas line leak. You can pour this mixture on the ground anywhere that you suspect a gas line outside underground too. 
  • White Fog or Mist: An unusual cloud of fog o mist around your home could be indicating a gas line leak. Notify the gas company immediately to report a gas line emergency.

What is the reason for gas leakage?

All gas leaks are not are always a gas line leak. They can often be from appliances that weren’t fitted or installed correctly, haven’t been maintained properly, or simply faulty, old appliances.  Gas can leak from an appliance that is misfitted or the gas hose that connects to the appliance. Gas can leak around seals of older appliances too. When buying or renting a used appliance, it is recommended to have the gas connections and gas lines checked. 

Is a small gas leak dangerous?

Any gas leak is dangerous because of the flammability of gas. No matter how small a gas line leak is, any flame or spark around can cause an explosion or fire. Make sure you know where and how to use gas line quick connect and disconnect in case of a gas leak. With this knowledge, you can disconnect a gas appliance or gas line quickly until you get the repair completed. 

Will a CO detector detect a gas leak?

A carbon monoxide detector cannot detect methane, natural gas, or propane gas leaks by itself. A carbon monoxide detector has sensors that detect carbon monoxide, but not raw fuel or fumes. Gas line leaks from gas appliances aren’t the only potential source of a gas leak, but gas leaks can come from inbound water lines, natural gas wells, or sump pits too. 

What can be more alarming about gas line leaks or any gas leak it that an explosion or fire can be started by turning a light off or on, setting the security alarm, or closing a door. Anything can create a  spark that will cause an explosion or fire from a gas line leak or gas fumes. 

gas stove burning

How do you seal a gas line?

It is rare for a gas line leak to occur, but when it does, it needs to be addressed immediately because of how dangerous escaping natural gas can be with carbon monoxide exposure. The best action is to call a professional plumber or the gas company, but you can repair the leak yourself with the following steps: 

  1. Shut the Gas Valve Off: Shutting off the gas valve will stop gas flow escaping into your home. 
  2. Check for Cracks or Holes: Thoroughly inspect the gas line for hairline cracks and holes, deformities, and irregularities. 
  3. Sealing the Cracks: From your local big box home improvement store or local plumbing store, purchase pipe sleeve that is rated for gas pipes, an epoxy resin-based material like fiberglass. 
  4. Check the Pipe Threads: Pipe threads can loosen or warp over time, causing gas line leaks. Inspect the threads, making sure the connection is thorough. If not, try tightening the pipe to the connection and if that doesn’t work, replace the gas pipe. 
  5. Test the Repairs and Replacement: With dish liquid and water in a spray bottle, spray every connect and gas line, leaks will be indicated by bubbles forming.

Need help with a potential gas leak in your home? Call the experts at (770) 672-0095 today.

Why is My Kitchen Sink Leaking Underneath?

A Plumber Repairs a Leaking Kitchen Sink.

Why is my kitchen sink leaking underneath?

A leak underneath the kitchen sink is a common plumbing problem, although it might go unnoticed for some time. Several possibilities exist that might be causing the leak. When a plumber provides kitchen sink repair, they’re going to check several possible issues that include:

  • A loose or damaged water line or water supply valve. Even when the faucet is turned off, water can still leak under the sink if this is the problem.
  • If a water line leak for the hand sprayer is far enough down the line, water might drip under the sink.
  • Corroded brass, copper, or galvanized steel drain pipes may cause a leak or connections that could come loose and create a leak under the sink.
  • A clogged P-trap, the clog could cause water to build up to drains and create a leak.

Whether you have a leaking sink or other problem, when you need Kitchen plumbing repair in Marietta, GA, BDS Plumbing Solutions Inc provides fast, effective, and affordable repairs. Find out how we can help with all your plumbing needs by calling (770) 672-0095.

Do plumbers fix sinks?

Plumbers provide a wide variety of services including kitchen sink repair. When you want exceptional fast, effective repairs, you can entrust all your kitchen plumbing repairs to BDS Plumbing Solutions Inc.  

How do I fix a leaky kitchen sink drain?

Whether you have older pipes or a loose connection, a common reason for leaks under the sink is a leak in the drain. For this type of kitchen sink repair, try these solutions:

  • Check the drain basket for clogs.
  • Use a wrench to detach the drain pipe from the drain basket and check for cracks on the seals and pipe as well as damage to the washer. You’ll need to replace the pipe and washer if damaged. If there is no damage, check the parts under the sink basket.
  • Use pliers to remove the sink basket, and remove the drain basket.
  • Use a caulk gun to apply sealants under the drain basket and top of the water basin. Allow the sealants to dry. 
  • Reassemble the parts and make sure the screws and washers on the connections are tightened.
  • Let the sealants dry for two to three days to make certain all the connections are secured.

Kitchen sink repair kit

There are several kitchen sink repair kits on the market today, although some of the main tools and materials you’ll need are a wrench, pliers, a caulk gun, and sealant to repair cracks and keep parts held together securely. You can also find kitchen sink installation kits that will have all the parts necessary to install a new sink. As with any plumbing repair, if you are uncertain about the best way to make the repair, get in touch with a professional. You don’t want to cause any serious damage to your plumbing that could lead to even more costly repairs. 

Kitchen sink crack repair

If you have a ceramic or porcelain kitchen sink, cracks may develop in the basin. Those cracks need to be repaired as soon as possible to prevent other serious problems from occurring. Fortunately, cracks are fairly easy to repair. 

  • Clean the sink thoroughly, removing all dirt and grime using an all-purpose cleaner and sponge. Allow the sink to dry.
  • Sand the chipped area lightly using 400-grit to 600-grit sandpaper. Roughen the chip’s edges slightly so the paint will adhere better.
  • Apply porcelain filler to the chip in layers until it is completely filled in. Allow each application to dry and lightly sand it before applying the next layer.
  • After allowing the filler to dry, apply porcelain touch-up paint. Follow manufacturer instructions when applying the paint.

Kitchen sink disposal repair

When it comes to kitchen sink repair, outside of leaks and repairing faucets, garbage disposals often pose problems, especially if they are clogged. Whenever you’re checking your disposal, never stick your hands or fingers inside it. Although the blades aren’t razor-sharp and are unlikely to slice your fingers, they can still bruise and otherwise harm your hands. 

Sometimes a disposal repair is a pretty simple fix. If you flip the switch and the motor doesn’t begin humming, this usually means there is an electrical problem. Make sure the disposal is plugged in, first. You can also try resetting the unit. The reset button at the bottom might have tripped a circuit. If it’s sticking out slightly, this is probably the case, and you can push it in to reset it. Other electrical problems should be handled by a professional. 

If you turn the disposal on and it hums but does nothing else, the flywheel inside is probably jammed. Often the clog is caused by something large like a bone or utensil. If you can see the cause of the clog using a flashlight, you may be able to remove it with pliers. Leaks and similar problems are best left to professionals.

How do I replace the plumbing under my kitchen sink?

Replacing the drain pipes under your kitchen sink is actually fairly simple, especially the curved pipes, or P-traps. To make this kitchen sink repair, before removing the old plumbing, you’ll want to put a bucket under the P-traps and shut off the water valves.  

  • Measure the pipes with a tape measure so you can get the right-sized replacements.
  • Unscrew the P-trap connections from the sink tailpiece, twisting the nut counterclockwise with your hand or a pair of adjustable pliers.
  • Once loosened, you can pull them from the connections and turn them upside down to drain them in the bucket if any water remains in them.
  • Traps connected to a common tee are removed, along with the tee.
  • Begin installing the new pipes (PVC preferably to avoid corrosion) by screwing in the new tailpieces.
  • New pipes are cut with a hacksaw to match the old ones you are replacing. The pipes should be the same diameter.
  • Use compression fitting to assemble the pipe and tighten the nuts by hand, until ready to install the P-traps. 
  • Each trap is slid onto the tailpiece and the nut tightened. The trap is swiveled to meet the pipe going to the drain. Assemble that end and tighten the nut.
  • Finally, fill the sink, and then open the drain to check for leaks. Tighten leaks with pliers.

When should you call a plumber for a clogged drain?

While some clogs might be easy to clear, other clogs are serious business and best left to a plumber to clear. If you have a clog that’s created a big mess, and the mess is spreading, it’s usually best to call a plumber. Clogs that affect every drain in the house should be cleared by a plumber. If clogs are affecting major drains like the kitchen sink, you should probably let a plumber take a look at it. 

A Plumber Works Under a Kitchen Sink.

Kitchen sink repair near me

When you are looking for fast, effective kitchen sink repair in Marietta, GA, turn to the experts at BDS Plumbing Solutions Inc. We can help you with any plumbing repair. All you need to do is call (770) 672-0095.

Is a Clogged Toilet a Maintenance Emergency?

plumbing repair

Will a Toilet Eventually Unclog Itself?

A toilet is an important part of the home, especially when there is only one in the entire residence. If that’s the case, it can be considered a plumbing emergency. While plumbers do strongly recommend that homeowners own plungers due to that on occasion the system cannot move what is flushed through. In some cases, the issue of the clogged toilet will take care of itself thanks to how the system naturally works. Being that modern toilets use a mix of gravity and internal pressure, there is absolutely no need to flush it again after discovering the clog. However, if it does not unclog over time, there are ways for a person to attempt to unclog the toilet by other means. A mix of baking (one cup) soda and (two cups) vinegar can be poured into the toilet bowl. This mixture can be replaced by dish soap if the prior materials are unavailable. The former mixture has the capacity to break down some blockages that may occur while the right soap can possibly loosen the blockage if it can be reached effectively. 

If all three methods of unclogging do not work, it is best to contact a plumber like those at BDS Plumbing Solutions Inc. Professional plumbers have distinct tools that can get directly to the source of what is clogging a toilet and clear it up or start the process of getting the toilet repaired. Sometimes the issue lay in the piping being old, damaged, or any number of other reasons. When needing emergency plumbing repairs in Marietta, GA we’re the guys to call. Reach out to us today at (770) 672-0095 to speak to one of our representatives.

What is Considered a Plumbing Emergency?

With some companies, the homeowner can label a repair an emergency repair, but it should be noted that to plumbers emergency plumbing is not a normal occurrence by any means. Depending on the region you live in, you can get different examples that have to do with the cold or particularly heavy rainstorms. Examples that can be considered emergency plumbing are:

  • Leaking or damaged piping
  • Scalding water that does not adhere to water heater controls
  • Overflowing sink
  • Leaking water heater
  • Sewage coming back up the toilet or drains
  • Frozen or shaking pipes

The particular sign that a plumbing issue is a plumbing emergency is the capability to damage property and possibly cause the homeowner danger. More often than not, if the problem can be contained to a bucket or be temporarily thwarted until a plumber reaches the residence, it’s not necessarily a plumbing emergency. However, at the same time, the example of the toilet applies here. If perhaps it is the only shower, bath, or toilet in the house then it can be considered.

Is Mold a Maintenance Emergency?

When it comes to mold in particular, it is uncommon for plumbers to treat that issue when it arises. However, plumbers like those found at BDS Plumbing Solutions Inc can actually help in taking care of the problem. Mold tends to grow in moist environments that are saturated with or affected by leaks when occurring in the home. This is where a plumber can help solve the problem, easing the strain and load of work on the homeowner. As it pertains to maintenance emergencies, plumbers can assist as shown above. Examples of maintenance emergency include:

  • Lack of heat or cooling
  • Fire
  • Gas line breaking
  • Waterline damage
  • Flooding

While not necessarily specialized to deal with parts of that list, plumbers can help with gas lines and water lines. With a maintenance emergency having near the same definition as a plumbing emergency, gas line and waterline damages do fall into the category of emergencies and can be dealt with promptly by professional plumbers.

plumbing repair

How Long do Emergency Plumbers Take?

It should be noted that when it comes to a plumbing emergency, a plumber will work as long as they need to to get the job done. In some cases, repairs are made to quickly solve the problem, so that the plumber may return to apply a more permanent solution. As a rule of thumb, however, the emergency can be solved within two to three hours with most plumbers generally taking less time than that. 

In some cases, like no hot water, while it may not necessarily be a plumbing emergency on its face the issue can lead to one. This is due to that when the system is not operating correctly, it is a signal that something is going wrong and needs to be checked out. This can lead to either the water heater being repaired or entirely replaced if the system is showing signs of a further problem or is simply too old. The same can be said about water pressure. When the homeowner finds that their water pressure is down, it can actually lead to a plumbing emergency like:

  • Damaging blockage
  • Severe leak
  • Sewer backup

The list can go on, but when you notice an issue with your plumbing or water system, you should seek out your plumber or those found at BDS Plumbing Solutions Inc. When needing emergency plumbing in Marietta, GA we can help. Call (770) 672-0095 today to arrange your appointment and get your plumbing issues resolved with our professionals.

Is It Hard to Replace a Kitchen Faucet?

kitchen faucet

Is it Hard to Replace Kitchen Faucet?

While it’s not necessarily difficult to replace a kitchen faucet, it is nonetheless important to contact a licensed plumber to perform any plumbing repairs. The most difficult part of replacing a kitchen faucet is removing the old kitchen faucet. Lots of problems pop up from time to time with faucets. These problems include corroded pipes, hard-to-reach nuts and bad access to fittings. 

How Much Does it Cost to Replace a Kitchen Faucet?

If you find yourself in need of Kitchen and bathroom repairs, it will be important to consider the overall costs. The cost to replace a kitchen faucet will depend on what part of the country you are in. The range vacillates from between $114 to $189 for a kitchen faucet replacement. If part of the plumber’s job includes removing an old faucet before installing a new one, homeowners can expect to pay $225 to $275 or more. That is because if your plumber has to adjust water lines, it will be more costly.

How Long Does it Take to Replace a Kitchen Faucet?

With regard to how long it takes to replace a kitchen faucet, it truly depends on how old and corroded the old faucet is. For a fairly simple job, some faucet replacements can only take an hour. For a more complex job that requires rerouting water lines, the time estimate will understandably lengthen. In any case, it is important to call a licensed plumber who will give you an accurate estimate. 

How Do I Remove an Old Kitchen Faucet?

Are you wondering how to remove an old kitchen faucet? The process is fairly straightforward. First, the plumber will turn off the water. Next, he or she will disconnect the supply lines. After that, the mounting nuts will be removed. This can be done by spraying penetrating oil on the mounting nuts. After fifteen minutes, the nuts will be ready to be turned counter-clockwise. The fourth step is to remove the faucet. The faucet will need to be lifted straight up. If the faucet sticks for any reason, the plumber can use a plastic putty knife to gently work the faucet loose. 

How Do You Remove a Single Hole from a Kitchen Faucet?

As previously mentioned, the most difficult part of faucet replacement is accessing and removing the fasteners. If both stems fit through a center hole in the sink, the plumber will probably need to remove a large nut or a mounting plate that is screwed to the bottom of the sink. The best way to reach the nut to unscrew it is by using a basin wrench.

Is Replacing a Faucet Easy?

If you need to replace a leak or outdated faucet, you should utilize a plumbing professional for the process. That way if anything goes wrong, your licensed and insured plumber will be able to take care of it. Nonetheless, it’s important to stipulate that a basin wrench and a few common tools can be used to replace a kitchen faucet. The process shouldn’t take longer than an hour, though it will take longer if the job is more complicated.

Tools to Replace Kitchen Faucet

There are a number of tools and materials that a plumber uses to replace a kitchen faucet. Please review the following bullet points to learn more.

  • The new faucet.
  • An adjustable wrench.
  • Channel-locking pliers.
  • Flexible supply lines.
  • A basin wrench.
  • A tape measure.
  • Plumber’s putty.

Replace Kitchen Faucet in RV

If you have a recreational vehicle that requires a new kitchen faucet, it will be important for you to find the right faucet replacement. There are a number of excellent resources online. A qualified plumbing contractor will also be able to relay resources and give you a qualified estimate for your RV faucet replacement.

kitchen faucet

Replace Kitchen Faucet Now No Water Pressure

If your kitchen sink doesn’t have any water pressure, that could be because your water line has broken. It could also be because routine plumbing repairs have caused low water pressure. If neither of those reasons has contributed to the low water pressure, it could very well be that your kitchen faucet has a clogged aerator on the tip of the faucet. It could also be because the faucet has a clogged cartridge. It is also important to keep in mind that newer aerators and cartridges on the market deliver less water as a function of saving water or being environmentally friendly. The best course of action for a homeowner is to contact an insured and licensed plumbing contractor so that they can determine the best pathway forward.

Do you have a kitchen remodel on your agenda? Our staff at BDS Plumbing Solutions Inc are ready to take your phone call at (770) 672-0095. Receive an accurate estimate to replace kitchen faucet in Marietta, GA!

Residential Sewer Line Repair

sewer connection for a home.

Home sewer services

Sewer line repair and replacement is not only expensive but makes a mess in the yard too, until a way to do sewer line repair without digging came along. Now sewer line repair is done by the trenchless method. How does trenchless sewer line repair work though?

In recent years, when old sewer pipes needed replacement, it was a mess. Then trenchless pipe relining appeared and quickly became the preferred method to rehabilitate old sewer pipes where they are instead of digging them up.

Clay, concreted or iron materials have disadvantages that guarantee they will break down or file at some point. With that in mind, it is necessary to verify the sewer line repair is a good candidate for pipe relining. A camera inspection inside the pipe can confirm this for you.

Where is trenchless sewer line repair used?

Accurate leak and specialization of line repair by way of trenchless sewer line repair, aka, no digging, trenchless sewer repair is a trendy substitute when able to use it. An experienced contractor in sewer line repair will reline a pipe system from the inside of a pipe and eliminate the costly and extensive excavation of your property.

Does this mean that trenchless sewer line repair is right for your particular property and case? After the professional contractor has explained the problem, offered the different scenarios of repairs, it is their ultimate decision to go with non-invasive sewer line repair, aka trenchless, or if they prefer the traditional method of digging up the ground.

More property owners are finding there are more benefits with the trenchless sewer line repair, with the biggest on being less expensive. Another benefit of spot sewer line repairs of aging sewer systems the traditional way often leads to creating a new leak.

Who Does Residential sewer line repair?

You can search the local yellow pages, ask a neighbor, or the local ag agency if they can suggest a “sewer line repair near me” based on what your needs are. It also helps to know what type of line is being repaired or replaced, if you prefer trenchless sewer line repair over the traditional method, and of course, the final expense will be a deciding factor for you.

What will Sewer Line Repair Cost

Replacing the average sewer line can cost from $3,000 to $6,000 and upward. Replacing a new sewer line can cost as much as $25,000 or more. Why so expensive? If the job is done manually in the old fashion way, that drives the cost of labor alone.  

home septic system

Is Sewer line repair covered by insurance?

The first thing to remember is that every homeowner’s insurance policy is different when it comes to a sewer line repair or sewer line replacement. Homeowner’s insurance can cover a variety of different sewer line problems, and the best way to know what is covered by your homeowner’s policy is to verify with your agent. 

If your current policy doesn’t have sewer line repair or replacement coverage as it is, inquire about what type of insurance is needed to have that type of coverage. Your insurance company may pay for coverage of backfill, excavation, and sewer line repair, but your co-pay could still be large. Verify the policy limits before committing to this type of work. 

You may be surprised at what little coverage your standard homeowner’s insurance will pay for a broken or collapsed sewer line repair. You may need to inquire about purchasing a backup rider, or a separate insurance policy for a sewer line insurance to fill in the gaps of your homeowner’s insurance excludes. 

Coverage will be dependent on the damage’s location and how the damage happened. Coverage of a standard homeowner’s insurance will apply to the following risks of a sewer line repair:

  • Aircraft damage
  • Civil Disturbance
  • Fire
  • Hail
  • Lightning
  • Riot Damage
  • Theft
  • Vandalism
  • Wind
  • Vehicular Damage that is not caused by the policyholder
  • Volcanic Eruption

Your homeowner’s coverage for any of these risks could be limited to a sewer line repair of damage within the boundaries of your property. An example would be lightning strikes a city line, they are responsible for their side of the damage and your policy will cover your side under the category of “other structure”. 

With trenchless sewer line repair, the days of digging a trench across your yard from the original pipe are gone. The trenchless method only requires a small pit to access the pipe on end and then a flexible tube that resembles neoprene and resin-coated is pushed into and through the damaged and old sewer pipe.

Compressed air is blown into it that pushes the sleeve outward and against the old pipe’s inside walls, sealing off the damage. As the resin hardens, it will make a solid pipe within a pipe, similar to that of a PVC pipe. While the diameter will be smaller, it will be resistant to root intrusion.

This type of sewer line repair is still done by experienced contractors that have been trained on the equipment and process. Hiring professionals will give you a guarantee and warranty purposes should do much like having gutter services around your home. Call (770) 672-0095 today for your sewer line repair in Marietta, GA.

Is a tankless water heater worth it?

tankless water heater on tile wall

How does a tankless hot water heater work? 

Tankless water heaters are a pretty “hot” thing going these days. You get hot water faster, it doesn’t waste water as it warms up, saves on energy bills, takes up less space in the house, etc.  So, when it comes time to replace your water heater, will you go with an electric tankless water heater as opposed to the style of a water heater you have?  

Tankless water heaters a ‘hot water on demand’ appliance, something that restaurants have had for years. There is no storage tank like the traditional water heaters. From the user end of the system, you turn the hot water faucet on and like magic, hot water comes out instantly!  

When you turn on the hot water faucet, cold water still travels from the mainline of your house to the tankless hot water heater. There is an electric element or a gas burner inside the unit that heats the water instantly. Gone are the days of standing there with the cold water running until it got hot. 

Tankless water heaters are more expensive than standard electric or gas water heaters. Here are the advantages that homeowners find that make it worthwhile: 

  • They use 30% to 50% less energy. This can save a typical household $100 annually, maybe more.   
  • By giving you instant hot water, no more storing 40-50 gallons of water in a tank which saves you money by not having to heat that tank full of water each time you need hot water. 
  • The tankless water heater is compact and takes less space in the house. 

Can a homeowner install a tankless water heater?

If you’re a basic all-around handyman kind of homeowner, then yeah, you probably can. However, there are different sizes and styles when it comes to tankless water heaters. Do you know if you need electric, natural gas or propane? How big of a house are you supplying hot water for? 

Because the typical tankless water heater requires more gas than the biggest residential furnaces, the local gas company will need to advise you what size of gas main you’re working with. Speaking of the gas company, the gas supply will need to be disconnected before you begin installing your tankless water heater.   

Also, before you begin the installation, you need to install the specific vent for your tankless water heater and wire the electricity to it. If there isn’t electricity close to where you’re installing the unit, you must run electricity to it. (Even the gas model is going to electricity). Water heaters have always required venting, just like your attic should have ventilation, so this isn’t anything new. However, the fittings will differ from your current water heater vent. 

Depending on the age of your house, the existing gas lines may need to be replaced to accommodate the increased demands of the tankless water heater unit. Sometimes, new water lines are needed, and the pressure relief valve discharge lines must be soldered. 

Last, you need to make sure your tankless water heater installation is up to building codes for your area and confirm that your homeowner’s insurance policy will cover any damage that happens due to installation mistakes. You also must find where to dispose of your old water tank when you’re done. 

These are just the things that we can think of off the top of our minds. There are many unforeseen things that can happen during the installation of a tankless water heater. By having the dealer where you purchase the unit install it, or hire a professional plumber with certification, insurance, and license. This way, any mistakes or problems, they will have to make good on it. 

With just the first paragraph of this answer, whether a homeowner can install their own tankless water heater, your first question may be “What tankless water heater do I need?”.  That is a question best answered by those with the experience and knowledge of tankless water heaters, but: 

Tankless water heaters are rated by the highest temperature rise workable at a provided flow rate. Hence, to choose the right size tankless water heater, the flow rate and temperature rise must be determined for the application you’re using for, either a single bathroom or a whole house. It is better to oversize than undersize a tankless water heater. 

Do tankless water heaters need a drain? 

Every tankless water heater requires a drain pan to be installed if the unit itself is installed where the possibility of damage could take place, the same as a standard style water heater. While there will be less water leaking, a tankless water heater is leaking will cause water damage and water damage is water damage and can be costly. 

Do tankless water heaters need to be flushed? 

It is the recommendation of manufacturers and experienced plumbers that you should flush a tankless water heater every 12 months for the same reason they recommend it to flush the traditional style water heaters. Depending on the quality of the water where you live, there will always be a building up minerals, such as calcium inside the unit. When left unattended, it will shorten the lifespan of your tankless water heater. If you live in hard water areas, flush your unit every 6 months. 

two pipes coming from tankless water heater running through wall in black and white

What is the downside of a tankless water heater? 

Most homeowners that have switched to a tankless water heater will tell you that the disadvantages are far outweighed by the advantages. By knowing what possible disadvantages there are, though, you can learn to work around them.

  • Tankless water heaters frequently do not supply ample enough hot water for simultaneous use like doing laundry while somebody is showering.
  • To have a constant temperature with different flow rates, modulating temperature control must be added to the tankless water heater system. Otherwise, there will be fluctuation with the water temperature, especially if different parts of the house have different water pressures.
  • Electric tankless water heaters pull a relatively high amount of electricity to meet the on-demand of hot water. This often requires older homes to have the wiring in the house upgraded.
  • Tankless gas water heaters require outdoor venting either directly or with an exhaust flue.
  • The pilot light of a gas-powered tankless water heater is wasting gas because it stays on even when not heating the water.

We have discussed the beauty and pros of the tankless water heater in this article. While there are many pros, there are cons too, like it still takes time for the hot water to get from the tankless unit to the tap. So, there is still a waste of water.  One solution to this is a tankless water heater with a recirculation pump that will give you instant hot water at any sink or in the shower. This recirculating pump keeps the heated water in the tap and will periodically circulate the water back to the tankless water heater unit to reheat. This will prevent the water inside the pipe from getting cooled off, giving you instant hot water wherever you turn on the faucet.  Want more information on tankless water heaters in Marietta, GA? Dial (770) 672-0095 today!

What Are the Best Gas Water Heaters?

Your gas water heater deserves an excellent installation

How Much Does it Cost to Replace a Gas Hot Water Heater?

According to a nationally acclaimed contractor, the average price for a plumber to replace a gas water heater is between $400 and $550. For an original gas water heater installation, the cost is much higher. In fact, the total cost for an installation could go as high as $1,500 to $2,300.

What are the Best Gas Water Heaters?

The best gas water heaters on the market today are exemplified by their efficiency and productivity. This list is compiled based upon the top ten best-rated gas water heaters of 2019. Please browse through the following list to find out more.

  1. A.O. Smith GPVX-75L ProMax SL Power Vent 7 Gas Water Heater
  2. Rheem G100-80 Natural Gas Universal Commercial Water Heater
  3. Takagi T-H3S-DV-N Condensing High-Efficiency Natural Gas Indoor Water Heater
  4. Rinnai V65EP 6.6 GPM Outdoor Low NOx Tankless Propane Water Heater
  5. Rheem RTG-64DVLN Prestige Low NOx Indoor Direct Vent Condensing Tankless Water Heater
  6. Eccotemp i12-NG Indoor Tankless Heater
  7. Rheem RTGH-84XLN Outdoor Natural Gas Condensing Tankless Water Heater
  8. O Smith XCG-50 ProMax Tall Gas Water Heater
  9. Rheem PROG50-42N RH67 PV Professional Classic Gas Water Heater
  10. Takagi T-T-KJr2-OS-LP Outdoor Tankless Water Heater

How Much is a 40 Gallon Gas Hot Water Heater?

If you need a gas water heater replacement you will want to know whether or not you can afford the cost. A 40-gallon gas water heater costs approximately $320-$1,600. This is in contrast to bigger and smaller sizes of water heaters, which have correspondingly larger and smaller price tags. Having a strong and resilient home means having a strong roof as well. A standing seam metal roofing in Duluth, GA can improve your home’s safety and security.

How Long Does a Gas Water Heater Last?

According to the manufacturer’s suggested service life estimates, gas water heaters are expected to last approximately eight to twelve years. With proper maintenance, water heaters can last longer. In fact, some repairs, including replacing a pressure-relief valve, or heating element, contribute to a longer-lasting gas water heater. 

What is the Average Cost to Install a Gas Water Heater?

Water heaters are incredibly important for the proper function of a household. It is also vitally important that homeowners receive an accurate estimate for their new gas water heater installation. Across the nation, the costs range between a low of $952 to $2,098. The proper installation of a gas water heater includes the cost of a basic water heater, permits, installation materials, installation labor by a local, licensed and insured plumber, and removal of the old unit. On average this total comes out to be $1,308.

Do Gas Water Heaters Require Electricity

While gas water heaters do not use electricity as their primary fuel to function, they will not work in the case of a blackout. This is because gas water heaters need their electric pilot light to operate. 

Why is Gas Water Heater Leaking

While a leaking gas water heater may seem like a small problem, like all problems associated with water leaks, they can quickly become a massive problem. This is because even a small amount of water can lead to damaged floors and subfloors. And, leaks have a nasty habit of growing bigger with time. There are several different reasons why a gas heater would be leaking. That’s why it’s important to determine where the water heater is leaking, from the top, or the bottom. If the leak is from the top of the water heater, the problem could lie with the cold water inlet pipe/valve, the TPR valve, the anode rod port, or the expansion tank. If the leak is occurring at the bottom of the tank, the leak could be coming from the TPR discharge valve or the drain valve. If the problem lies with the tank itself leaking, you will need to replace your water heater as soon as possible.

Can Gas Water Heater Explode

The shortest answer to this question is yes, gas water heaters can explode. If the temperature is set too high, or if the pressure relief valve of the water heater malfunctions, a water heater can indeed explode. An explosion is possible with both a gas and an electric water heater. When a water heater does explode, it can very closely resemble a rocket.

A gas water heater is an excellent choice for your home

What is Better Gas Water Heater or Electric

There are a number of different aspects that impact whether or not a gas water heater is better than an electric water heater. One of the factors that may impact your final decision is the local utility costs. Gas water heaters are typically less expensive to operate than electric. Another factor to consider is, based upon energy savings, gas heaters generally make up the difference in price in about one year. At the end of the day, the final choice depends upon whether your reliance on gas or electricity is more important to your lifestyle. 

Scheduling an appointment for your gas water heater has never been easier. Our staff at BDS Plumbing Solutions Inc are ready to take your phone call at (770) 672-0095. Discover more about what an update for your gas water heater in Marietta, GA can do for you!

How Do I Find a Plumbing Leak?

A Woman Holding Napkin Under Pipe Leak.

Leaks May Not Be Obvious, But Finding Them Can Be Easy

Leaks in your plumbing can range from being a minor inconvenience to being a hugely troublesome burden. Sometimes, you might not even be aware of a plumbing leak until after it has persisted and caused a lot of damage to areas around the leak. While there are definitely instances where calling in the professionals should be the very first move, there are scenarios where it is okay to fix a plumbing leak yourself. If you have the skills and experience, you can save yourself a lot of money and potentially save from damages that might be incurred waiting for a plumber to come out.

How Do I Find a Plumbing Leak?

There are simple leaks called splash leaks that is when water escapes past a shower door or curtain. It is the most common type of bathroom leak and it may sound minor, but it can cause major damage if the water manages to seep into the subfloor where the floor meets the shower or tub. It can even lead to the loosening and degradation of tiles and flooring. There are also leaks that are caused by drains or toilet flanges. There are a variety of things that you should be on the lookout for when noticing a leak, particularly in your bathroom:

  • Loose or damaged tiles or flooring
  • Water coming from the base of the toilet
  • Stains on ceilings underneath the bathroom
  • Persistent mold, peeling paint near your tub or shower
  • Dampness or puddles inside of your cabinets that are under faucets
  • A loose faucet base
  • Caulk that is beginning to break down around fixtures

These are just a handful of the things to look out for. It is important to keep in mind that there are a litany of different locations where a plumbing leak can occur. That makes it harder to pinpoint a plumbing leak without actually taking the time to look into it. The key is to look for water buildup or stains in your bathroom to know that something is amiss.

Does a Leak Always Cause Mold?

While it is impossible to say that mold occurs in every case of a water leak, it is safe to assume that mold will pop up. And the thing about mold is that it can pop up relatively; in the span of 24 to 48 hours. Mold is a fungus that spreads by releasing its spores so that it can produce. It is important to be aware of the spread of mold because mold can cause damage to your respiratory system and cause breathing problems if left unchecked over a long period. Generally speaking, water leaks will cause mold in the areas that they persist. Mold can grow just about anywhere, too. Anywhere that there are stains or damp areas, mold can sprout.

This can be in cabinets, along baseboards, in the caulking of showers and bathtubs, and so much more. It is important to know when mold is growing in your home because of those potential respiratory problems, it is essential that you not let the mold persist over an extended period. Try to clean up any spills or leaks as quickly as you can in order to avoid having to bring out a professional mold removal service. Mold can not only be damaging to your person but your wallet as well. Take the necessary steps to prevent mold growth or to identify it quickly. If you have a full-blown outbreak of it, mold can be especially difficult to take care of highly dangerous as well.

What Do You Do If You Suspect a Plumbing Leak?

A Plumber Fixing a Pipe Leak with a Red Wrench.

Contact a Plumber for Repairs!

If you know that you have a plumbing leak, it is likely the best move to call in a professional service. Sure, there are definitely smaller leaks that can be patched and repaired by an amateur plumber, but you should not ever have to question the level of quality that you are getting when you use a professional service. If you have the skills to implement a patch, it might be the best move to apply a temporary patch to quell the flow of water until the professionals can arrive on the scene. Anything that can prevent any further damage or mold growth is important to the process and something that you should take note of. When you call BDS Plumbing Solutions Inc for repairs for a plumbing leak in Marietta, GA, you can rest easily knowing that you are getting the correct repairs done and stopping those leaks from becoming a far bigger issue. When those leaks are left unattended, they can cause serious damage to things like flooring, ceilings below, appliances, fixtures, and a million other things. Calling us at (770) 672-0095 for professional repair service to get those leaks taken care of is the best and smartest step that you can take in matters of a leak.