While it’s not necessarily difficult to replace a kitchen faucet, it is nonetheless important to contact a licensed plumber to perform any plumbing repairs. The most difficult part of replacing a kitchen faucet is removing the old kitchen faucet. Lots of problems pop up from time to time with faucets. These problems include corroded pipes, hard-to-reach nuts and bad access to fittings.
How Much Does it Cost to Replace a Kitchen Faucet?
If you find yourself in need of Kitchen and bathroom repairs, it will be important to consider the overall costs. The cost to replace a kitchen faucet will depend on what part of the country you are in. The range vacillates from between $114 to $189 for a kitchen faucet replacement. If part of the plumber’s job includes removing an old faucet before installing a new one, homeowners can expect to pay $225 to $275 or more. That is because if your plumber has to adjust water lines, it will be more costly.
How Long Does it Take to Replace a Kitchen Faucet?
With regard to how long it takes to replace a kitchen faucet, it truly depends on how old and corroded the old faucet is. For a fairly simple job, some faucet replacements can only take an hour. For a more complex job that requires rerouting water lines, the time estimate will understandably lengthen. In any case, it is important to call a licensed plumber who will give you an accurate estimate.
How Do I Remove an Old Kitchen Faucet?
Are you wondering how to remove an old kitchen faucet? The process is fairly straightforward. First, the plumber will turn off the water. Next, he or she will disconnect the supply lines. After that, the mounting nuts will be removed. This can be done by spraying penetrating oil on the mounting nuts. After fifteen minutes, the nuts will be ready to be turned counter-clockwise. The fourth step is to remove the faucet. The faucet will need to be lifted straight up. If the faucet sticks for any reason, the plumber can use a plastic putty knife to gently work the faucet loose.
How Do You Remove a Single Hole from a Kitchen Faucet?
As previously mentioned, the most difficult part of faucet replacement is accessing and removing the fasteners. If both stems fit through a center hole in the sink, the plumber will probably need to remove a large nut or a mounting plate that is screwed to the bottom of the sink. The best way to reach the nut to unscrew it is by using a basin wrench.
Is Replacing a Faucet Easy?
If you need to replace a leak or outdated faucet, you should utilize a plumbing professional for the process. That way if anything goes wrong, your licensed and insured plumber will be able to take care of it. Nonetheless, it’s important to stipulate that a basin wrench and a few common tools can be used to replace a kitchen faucet. The process shouldn’t take longer than an hour, though it will take longer if the job is more complicated.
Tools to Replace Kitchen Faucet
There are a number of tools and materials that a plumber uses to replace a kitchen faucet. Please review the following bullet points to learn more.
- The new faucet.
- An adjustable wrench.
- Channel-locking pliers.
- Flexible supply lines.
- A basin wrench.
- A tape measure.
- Plumber’s putty.
Replace Kitchen Faucet in RV
If you have a recreational vehicle that requires a new kitchen faucet, it will be important for you to find the right faucet replacement. There are a number of excellent resources online. A qualified plumbing contractor will also be able to relay resources and give you a qualified estimate for your RV faucet replacement.
Replace Kitchen Faucet Now No Water Pressure
If your kitchen sink doesn’t have any water pressure, that could be because your water line has broken. It could also be because routine plumbing repairs have caused low water pressure. If neither of those reasons has contributed to the low water pressure, it could very well be that your kitchen faucet has a clogged aerator on the tip of the faucet. It could also be because the faucet has a clogged cartridge. It is also important to keep in mind that newer aerators and cartridges on the market deliver less water as a function of saving water or being environmentally friendly. The best course of action for a homeowner is to contact an insured and licensed plumbing contractor so that they can determine the best pathway forward.
Do you have a kitchen remodel on your agenda? Our staff at BDS Plumbing Solutions Inc are ready to take your phone call at (770) 672-0095. Receive an accurate estimate to replace kitchen faucet in Marietta, GA!